Dimensions (WxDxH)
Weight
Power Requirements
Without PoE
Power
Consumption
Full Loading PoE
PoE Standard
PoE Power Supply Type
PoE Power Output
Power Pin Assignment
PoE Power Budget
PoE Ability PD @ 15 watts
PoE Ability PD @ 30 watts
PoE Ability PD @ 60 watts
Layer 2 Function
Basic Management Interfaces
Secure Management Interfaces
Port Configuration
Port Status
Port Mirroring
VLAN
Link Aggregation
QoS
Per 10/100/1000T RJ45 PoE+ Ports:
PoE-in-Use (Amber)
LNK/ACT (Green)
Per SFP Interface:
100 LNK/ACT (Amber)
1000 LNK/ACT (Green)
PoE Usage:
60W, 120W, 180W, 240W (Amber)
991g
Dual 48~56V DC (>51V DC for PoE+ output recommended)
Max. 7.3 watts/25.04BTU
Max. 252.3 watts/865.64BTU
IEEE 802.3at Power over Ethernet Plus/PSE
End-span
IEEE 802.3af Standard
- Per port 48V~51V DC (depending on the power supply), max. 15.4 watts
IEEE 802.3at Standard
- Per port 51V~56V DC (depending on the power supply), max. 36 watts
1/2(+), 3/6(-)
240W maximum (depending on power input)
8
8
8
Console; Telnet; Web browser; SNMP v1, v2c
SSH, SSL, SNMP v3
Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable/enable
Display each port's speed duplex mode, link status, flow control status,
auto negotiation status, trunk status
TX/RX/both
1 to 1 monitor
802.1Q tagged based VLAN, up to 255 VLAN groups
Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
MVR (Multicast VLAN Registration)
Up to 255 VLAN groups, out of 4095 VLAN IDs
IEEE 802.3ad LACP/static trunk
Traffic classification based, strict priority and WRR
8-level priority for switching
25
User's Manual of IGS-5225 series
72 x 107 x 152 mm
Max. 10.1 watts/34.44BTU
Max. 255.9 watts/872.62BTU
1065g