Planet IGS-5225 Series User Manual page 372

The page includes the following fields:
Object
Port
•
Policy ID
•
Action
•
Rate Limiter ID
•
• Port Redirect
• Mirror
• Logging
• Shutdown
• State
• Counter
Buttons
: Click to apply changes
Description
The logical port for the settings contained in the same row.
Select the policy to apply to this port. The allowed values are 0 through 255.
The default value is 0.
Select whether forwarding is permitted ("Permit") or denied ("Deny").
The default value is "Permit".
Select which rate limiter to apply on this port. The allowed values are Disabled or
the values 1 through 16.
The default value is "Disabled".
Select which port frames are redirected on. The allowed values are Disabled or a
specific port number and it can't be set when action is permitted. The default
value is "Disabled".
Specify the mirror operation of this port. The allowed values are:
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored.
The default value is "Disabled".
Specify the logging operation of this port. The allowed values are:
Enabled: Frames received on the port are stored in the System Log.
■
Disabled: Frames received on the port are not logged.
■
The default value is "Disabled".
Please note that the System Log memory size and logging rate are limited.
Specify the port shut down operation of this port. The allowed values are:
Enabled: If a frame is received on the port, the port will be disabled.
■
Disabled: Port shut down is disabled.
■
The default value is "Disabled".
Specify the port state of this port. The allowed values are:
Enabled: To reopen ports by changing the volatile port configuration of the
■
ACL user module.
Disabled: To close ports by changing the volatile port configuration of the
■
ACL user module.
The default value is "Enabled".
Counts the number of frames that match this ACE.
372
User's Manual of IGS-5225 series