Protocol-Based Vlan - Planet WGSD-10020 User Manual

4.6.13 Protocol-based VLAN

This page allows you to add new protocols to Group Name (unique for each Group) mapping entries as well as allow you to see
and delete already mapped entries for the switch. The Protocol-based VLAN screen in
The page includes the following fields:
Object
• Delete
• Frame Type
• Value
Figure 4-6-19 Protocol to Group Mapping Table page screenshot
Description
To delete a Protocol to Group Name map entry, check this box. The entry will be
deleted on the switch during the next Save.
Frame Type can have one of the following values:
Ethernet
1.
LLC
2.
SNAP
3.
Note: On changing the Frame type field, valid value of the following text field will
vary depending on the new frame type you selected.
Valid value that can be entered in this text field depends on the option selected
from the the preceding Frame Type selection menu.
Below is the criteria for three different Frame Types:
For Ethernet: Values in the text field when Ethernet is selected as a
1.
Frame Type is called etype. Valid values for etype ranges from
0x0600-0xffff
For LLC: Valid value in this case is comprised of two different
2.
sub-values.
a. DSAP: 1-byte long string (0x00-0xff)
b. SSAP: 1-byte long string (0x00-0xff)
For SNAP: Valid value in this case also is comprised of two different
3.
User's Manual of WGSD-10020 Series
Figure 4-6-19
132
appears.