VLAN Parameters
Object
• 802.1Q Tagged
VLAN ID Filter
•
VLAN ID
•
Tag Priority
•
ARP Parameters
The ARP parameters can be configured when Frame Type "ARP" is selected.
Object
ARP/RARP
•
Request/Reply
•
•
Sender IP Filter
Description
Specify whether frames can hit the action according to the 802.1Q tagged. The allowed
values are:
Any: Any value is allowed ("don't-care").
Enabled: Tagged frame only.
Disabled: Untagged frame only.
The default value is "Any".
Specify the VLAN ID filter for this ACE.
Any: No VLAN ID filter is specified. (VLAN ID filter status is "don't-care".)
■
Specific: If you want to filter a specific VLAN ID with this ACE, choose this
■
value. A field for entering a VLAN ID number appears.
When "Specific" is selected for the VLAN ID filter, you can enter a specific VLAN ID
number. The allowed range is 1 to 4095. A frame that hits this ACE matches this VLAN
ID value.
Specify the tag priority for this ACE. A frame that hits this ACE matches this tag priority.
The allowed number range is 0 to 7. The value Any means that no tag priority is
specified (tag priority is "don't-care".)
Description
Specify the available ARP/RARP opcode (OP) flag for this ACE.
Any: No ARP/RARP OP flag is specified. (OP is "don't-care".)
■
ARP: Frame must have ARP/RARP opcode set to ARP.
■
RARP: Frame must have ARP/RARP opcode set to RARP.
■
Other: Frame has unknown ARP/RARP Opcode flag.
■
Specify the available ARP/RARP opcode (OP) flag for this ACE.
Any: No ARP/RARP OP flag is specified. (OP is "don't-care".)
■
Request: Frame must have ARP Request or RARP Request OP flag set.
■
Reply: Frame must have ARP Reply or RARP Reply OP flag.
■
Specify the sender IP filter for this ACE.
Any: No sender IP filter is specified. (Sender IP filter is "don't-care".)
■
Host: Sender IP filter is set to Host. Specify the sender IP address in the
■
SIP Address field that appears.
User's Manual of IGS-5225 series
364