Port Configuration - Planet IGS-5225 Series User Manual

4.6.4 Port Configuration

This section allows the user to inspect and configure the current PoE port settings as
IGS-5225-8P2T2S/IGS-5225-8P4S/IGS-5225-4P2S

The page includes the following fields:
Object
• PoE Mode
• Schedule
• Priority
• Power Allocation
Figure 4-6-1-3: Power over Ethernet Configuration Screenshot
Description
There are three modes for PoE mode.
Enable: enable PoE function..

 Disable: disable PoE function.
Schedule: enable PoE function in schedule mode.

Indicates the schedule profile mode. Possible profiles are:
Profile1

Profile2

Profile3

Profile4

The Priority represents PoE ports priority. There are three levels of power priority
named Low, High and Critical.
The priority is used in case the total power consumption is over the total power
budget. In this case, the port with the lowest priority will be turned off, and power
for the port of higher priority will be offered.
It can limit the port PoE supply wattage. Per port maximum value must be less
than 36W watts; total ports values must be less than the Power Reservation
value. Once power overload is detected, the port will automatically shut down
and continue to be in detection mode until Pad's power consumption is lower
than the power limit value.
User's Manual of IGS-5225 series
Figure 4-6-1-3
802.3at PoE+ Switch – PoE Port Configuration
390
shows.