Planet IGS-5225 Series User Manual page 329

L2+ ring managed gigabit ethernet switch
Hide thumbs Also See for IGS-5225 Series:
Table of Contents

Advertisement

The page includes the following fields:
Global Configuration
These setting are common for all of the RADIUS Servers.
Object
• Timeout
• Retransmit
• Dead Time
• Key
• NAS-IP-Address
• NAS-IPv6-Address
• NAS-Identifier
Server Configuration
The table has one row for each RADIUS Server and a number of columns, which are:
Object
• Delete
• Hostname
• Auth Port
Description
Timeout is the number of seconds, in the range 1 to 1000, to wait for a reply from
a RADIUS server before retransmitting the request.
Retransmit is the number of times, in the range from 1 to 1000; a RADIUS
request is retransmitted to a server that is not responding. If the server has not
responded after the last retransmit, it is considered to be dead.
The Dead Time, which can be set to a number between 0 and 3600 seconds, is
the period during which the switch will not send new requests to a server that has
failed to respond to a previous request. This will stop the switch from continually
trying to contact a server that it has already determined as dead.
Setting the Dead Time to a value greater than 0 (zero) will enable this feature, but
only if more than one server has been configured.
The secret key - up to 63 characters long - shared between the RADIUS server
and the switch.
The IPv4 address to be used as attribute 4 in RADIUS Access-Request packets.
If this field is left blank, the IP address of the outgoing interface is used.
The IPv6 address to be used as attribute 95 in RADIUS Access-Request
packets. If this field is left blank, the IP address of the outgoing interface is used.
The identifier - up to 253 characters long - to be used as attribute 32 in RADIUS
Access-Request packets. If this field is left blank, the NAS-Identifier is not
included in the packet.
Description
To delete a RADIUS server entry, check this box. The entry will be deleted during
the next Save.
The IP address or hostname of the RADIUS server.
The UDP port to use on the RADIUS server for authentication.
329
User's Manual of IGS-5225 series

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents