Installing The Sfp Transceiver - Planet IGS-5225 Series User Manual

2.3.1 Installing the SFP Transceiver

The sections describe how to insert an SFP/SFP+ transceiver into an SFP/SFP+ slot. The SFP/SFP+ transceivers are
hot-pluggable and hot-swappable. You can plug in and out the transceiver to/from any SFP/SFP+ port without having to power
down the Industrial Managed Switch as
Approved PLANET SFP/SFP+ Transceivers

PLANET Industrial Managed Switch supports both single mode and multi-mode SFP transceivers. The following list of
approved PLANET SFP/SFP+ transceivers is correct at the time of publication:
Fast Ethernet Transceiver (100BASE-X SFP)
Model DDM
MFB-FX --
MFB-F20 --
MFB-F40 --
MFB-F60 --
MFB-F120 --
MFB-TFX --
MFB-TF20 --
Figure 2-19 appears.
Figure 2-19: Plugging in the SFP/SFP+ Transceiver
Connector
Speed (Mbps)
Interface
100 LC
100 LC
100 LC
100 LC
100 LC
100 LC
100 LC
User's Manual of IGS-5225 series
Fiber Mode Distance
Multi Mode 2km
Single Mode 20km
Single Mode 40km
Single Mode 60km
Single Mode 120km
Multi Mode 2km
Single Mode 20km
63
Operating
Wavelength (nm)
Temp.
0 ~ 60 ℃
1310nm
0 ~ 60 ℃
1310nm
0 ~ 60 ℃
1310nm
0 ~ 60 ℃
1310nm
0 ~ 60 ℃
1550nm
-40 ~ 75 ℃
1310nm
-40 ~ 75 ℃
1310nm