Planet IGS-5225 Series User Manual page 408

• aBLK
• aTSF
Peep MEP Configuration:
Object
• Delete
• Peer MEP ID
• Unicast Peer MAC
• cLOC
• cRDI
• cPeriod
• cPriority
Buttons
: Click to add a new peer MEP.
The consequent action of blocking service frames in this flow is active.
The consequent action of indicating Trail Signal Fail to-wards protection is active.
Description
This box is used to mark a Peer MEP for deletion in next Save operation.
This value will become an expected MEP ID in a received CCM - see 'cMEP'.
This MAC will be used when unicast is selected with this peer MEP. Also this
MAC is used to create HW checking of receiving CCM PDU (LOC detection) from
this MEP.
Fault Cause indicating that no CCM has been received (in 3,5 periods) - from this
peer MEP.
Fault Cause indicating that a CCM is received with Remote Defect Indication -
from this peer MEP.
Fault Cause indicating that a CCM is received with a period different what is
configured for this MEP - from this peer MEP.
Fault Cause indicating that a CCM is received with a priority different what is
configured for this MEP - from this peer MEP.
408
User's Manual of IGS-5225 series