Planet IGS-5225 Series User Manual page 41

■ Console Port
The console port is an RJ45 port connector. It is an interface for connecting a terminal directly. Through the console port, it
provides rich diagnostic information including IP address setting, factory reset, port management, link status and system
setting. Users can use the attached DB9 to RJ45 console cable in the package and connect to the console port on the
device. After the connection, users can run any terminal emulation program (Hyper Terminal, ProComm Plus, Telix,
Winterm and so on) to enter the startup screen of the device.
■ Reset Button
On the upper left side of the front panel, the reset button is designed for rebooting the Industrial Managed Switch without
turning off and on the power. The following is the summary table of reset button
IGS-5225-4UP1T2S
Figure 2-6:
IGS-5225-4UP1T2S Reset Button
IGS-5225-8P2T2S
Figure 2-7:
IGS-5225-8P2T2S Reset Button
41
User's Manual of IGS-5225 series
functions:
IGS-5225-8P4S
Figure 2-8:
IGS-5225-8P4S Reset Button