Stihl MS 441 Manual page 39

: Take out screws (arrows).
– Remove and examine muffler (1),
replace if necessary.
2
: Remove heat shield (1) and
gasket (2).
Spark arresting screen
: Take out screw (arrow).
38
1
: Pull out spark arresting
screen (1).
– Clean spark arresting screen (1)
and fit a new screen if necessary.
1
1
: Examine insulating mat (1)
if fitted and use a new mat if
necessary.
1
b
– Note the following dimensions
when installing the insulating
mat (1):
a = 11 mm
b = 9 mm
1
– Examine stud bolts (arrows) and
replace if necessary.
: Take out stud bolts (arrows).
– Coat screw thread (arrow) of stud
bolts with screw locking adhesive
before fitting the stud bolts,
b 17.
a
– Move the machine into a vertical
position.
: Examine and clean the sealing
faces (arrows), and remove any
gasket residues.
MS 441, MS 441 C