Stihl MS 441 Manual page 128

1
: Take out screws (arrows).
– Remove thermostatic switch (1).
1
– Fit new thermostatic switch (1).
: Fit and tighten screws (arrows).
MS 441, MS 441 C
– Install carburetor, b 14.3.
: Push connector (arrow) onto
terminal socket.
– Wiring must rest in the retaining
lug (strain relief).
– Reassemble all other parts in the
reverse sequence.
– Tightening torques, b 3.5.
– Check correct operation.
127