: Position clutch on crankshaft stub
so that the raised hexagon
(arrow) faces outwards.
1
: Screw clutch (1) onto the
crankshaft stub with the hexagon
(arrow) and tighten it down – left-
hand thread.
– Tightening torques, b 3.5.
– Pull locking strip out of the
cylinder.
– Reassemble all other parts in the
reverse sequence.
MS 441, MS 441 C
6.1
Clutch drum
– Remove chain sprocket cover,
bar and chain, b 5.
: Pull hand guard (1) towards the
front handle.
2
1
: Remove circlip (1).
: Remove washer (2).
1
: Remove rim sprocket (1).
1
1
: Remove clutch drum (1).
1
Machines with QuickStop Super
Disengage the brake before
removing the clutch drum.
: Press and hold the trigger
interlock (1).
– Remove clutch drum.
21