Stihl MS 441 Manual page 29

: Ease brake spring (1) of brake
lever off the anchor pin (arrow).
: Unhook brake spring (1) from
brake lever.
: Take out screw (arrow).
1
: Draw hand guard (1) and brake
lever (2) off the pivot pins
simultaneously.
– Take out hand guard and brake
lever.
28
1
: Detach brake cable (1).
2
: Pull brake lever (1) out of hand
guard (2).
– Examine brake lever and hand
guard; fit new parts if necessary.
1
2
– Examine pins and replace if
necessary, b 7.5.
– Examine cam lever and replace if
necessary, b 7.4.
Clean the dismantled parts with
1
a little commercially available
solvent-based degreasant not
containing any chlorinated or
halogenated hydrocarbons.
– Position brake lever so that
mount for brake spring (arrow) is
at the top.
: Slide brake lever (2) into recess
in hand guard (1) until the holes
are lined up.
1
: Slide hand guard with brake lever
across the machine until it rests
against the pivot pins (arrows).
2
: Attach brake cable (1) to hole
(arrow) in brake lever.
1
MS 441, MS 441 C