Stihl MS 441 Manual page 25

1
: Remove cover (1).
2
: Release the chain brake by
pushing the hand guard (1)
towards the front handle.
: Additionally press and hold the
trigger interlock (2) on machines
with QuickStop Super.
The brake band is now relaxed.
– Remove clutch drum, b 6.1.
– Remove clutch, b 6.
24
1
: Take out screw (1).
: Ease brake band out of guide
(arrow).
1
1
: Guide brake band (1) past guides
(arrows) and take it out.
The brake band must not be
overstretched.
1
: Turn brake band (1) slightly aside
and disconnect it from the brake
lever (arrow).
Install a new brake band if there
are noticeable signs of wear (large
areas on the inside diameter and/or
parts of the outside diameter)
and its remaining thickness is less
than 0.6 mm.
1
: Attach brake band (1) to brake
lever (arrow) sideways and turn it
towards its mount.
1
Machines with QuickStop Super
: Attach brake band (1) to brake
lever (arrow) sideways and turn it
towards its mount.
MS 441, MS 441 C