Siemens SINUMERIK 840D sl Function Manual page 1356

Detailed description
2.11 General conditions and NC-VAR_Selector
2.11 General conditions and NC-VAR_Selector
2.11.1 Supplementary conditions
2.11.1.1 Programming and parameterizing tools
Hardware
Programming devices or PCs with the following equipment are required for the PLCs
installed on the SINUMERIK 810D and 840D:
Processor
RAM (MB)
Hard disk,
free capacity (MB)
interfaces
Graphic
Mouse
Operating system
The required version of STEP7 can be installed on equipment meeting the above
requirements in cases where the package has not already been supplied with the
programming device.
The following functions are possible with this package:
• Programming
• Configuring
82
– Editors and compilers for STL (complete scope of the language incl. SFB/SFC calls),
LAD, FBD
– Creation and editing of assignment lists (symbol editor)
– Data block editor
– Input and output of blocks ON/OFF line
– Insertion of modifications and additions ON and OFF line
– Transfer of blocks from programming device to the PLC and vice versa
– Parameterizing tool HW Config for CPU and I/O device parameterization
– NetPro parameterizing tool for setting the CPU communication parameters
– Output of system data such as hardware and software version, memory capacity, I/O
expansion/assignment
Minimum
Pentium
256
500
MPI, Ethernet incl. cable
Memory card
SVGA (1024*768)
Yes
Windows 2000 /XP Professional, STEP7 version 5.3 SP2 or
higher
Basic logic functions: PLC basic program solution line (P3 sl)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
Recommendation
Pentium
512 or more
> 500