Siemens SINUMERIK 840D sl Function Manual page 1332

Detailed description
2.7 Structure and functions of the basic program
2.7.8 Symbolic programming of user program with interface DB
General
Note
The basic program library on the CD supplied with the Toolbox for the 840D contains files
NST_UDTB.AWL and TM_UDTB.AWL.
The compiled UDT blocks from these two files are stored in the CPU program of the basic
program.
A UDT is a data type defined by the user that can, for example, be assigned to a data block
generated in the CPU.
Symbolic names of virtually all the interface signals are defined in these UDT blocks.
The UDT numbers 2, 10, 11, 19, 21, 31, 71, 72, 73 are used.
The assignments have been made as follows:
UDT assignments
UDT
number
UDT 2
UDT 10
UDT 11
UDT 19
UDT 21
UDT 31
UDT 71
UDT 72
UDT 73
UDT77
UDT1002 DB 2
To symbolically program the interface signals, the interface data blocks must first be
symbolically assigned using the symbol editor.
For example, symbol "AxisX" is assigned to operand DB31 with data type UDT 31 in the
symbol file.
After this input, the STEP 7 program can be programmed in symbols for this interface.
58
Assignment to interface DB
DB 2
DB 10
DB 11
DB 19
DB 21 to DB 30
DB 31 to DB 61
DB71
DB 72
DB 73
DB 77
Significance
Interrupts/Messages
NCK signals
Mode group signals
HMI signals
Channel signal
Axis/spindle signals
Tool management: Load/unload locations
Tool management: Change in spindle
Tool management: Change in revolver
MCP and HHU signals with standard SDB 210
extended alarms / messages (FB 1-Parameter
"ExtendAlMsg:=TRUE"
Basic logic functions: PLC basic program solution line (P3 sl)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0