Siemens SINUMERIK 840D sl Function Manual page 1829

Length of cutting edge
The cutting edge position describes the position of the tool tip P in relation to the cutting
edge center point S. The cutting edge position is entered in tool parameter 2 (shown as P2 in
the figure).
Figure 2-6
Figure 2-7
Figure 2-8
Basic logic functions: Tool Offset (W1)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
Tool parameter 2 (P2): Machining behind the turning center
Tool parameter 2 (P2): Machining in front of the turning center
Tool parameter 2 (P2): Cutting edge position for vertical boring and turning mills
Detailed Description
2.3 Tool cutting edge
41