Installing The Ctp2000 Platform In Freestanding Mode; Special Guidelines For Installing Ctp2056 Chassis In A Rack - Juniper CTP2000 Series Hardware Manual

Installing the CTP2000 Platform in Freestanding Mode

When installing the device on a table top or in any other freestanding mode, be sure to leave enough space
around the device for adequate ventilation. Position the chassis with easy access to the connections that
it needs for power, local communications, and remote communications.
WARNING:
required for the heavier CTP platforms.
CAUTION:
sure that persons handling the device wear an antistatic device.
RELATED DOCUMENTATION
Before You Install the CTP2000 Platform | 90
Installing the CTP2000 Platform in a Rack | 92
Cabling the CTP2000 Platform Overview | 108

Special Guidelines for Installing CTP2056 Chassis in a Rack

Before installing the CTP2056 platform in a rack, consider the following guidelines:
You can install up to four CTP2056 chassis in a single 7-ft. (2.1-m) rack. Installing multiple devices in a
single rack enables you to maximize your available space.
Install the CTP2056 chassis on the bottom of the rack. Mount lighter devices higher in the rack.
RELATED DOCUMENTATION
CTP2000 Rack Requirements | 42
Installing the CTP2000 Platform in a Rack | 92
At least two people are required to lift the device. Three people are
To prevent electrostatic damage to the device and its components, make
91