Juniper CTP2000 Series Hardware Manual page 80

Circuit to packet platforms
Hide thumbs Also See for CTP2000 Series:
Table of Contents

Advertisement

WARNING:
activity.
WARNING:
before attaching power cables.
WARNING:
WARNING:
on equipment that is connected to power lines. Metal objects heat up when connected
to power and ground and can cause serious burns or become welded to the terminals.
CAUTION:
equipment into a rack.
RELATED DOCUMENTATION
Federal Communications Commission (FCC) Statement | 78
FCC Requirements for Consumer Products | 78
Food and Drug Administration, Center for Devices and Radiological Health | 79
Compliance with Canadian Regulations | 79
Before You Install a CTP Platform | 40
Do not work on the device or connect or disconnect cables during lightning
Be sure that circuit breakers for the power source are in the OFF position
Before servicing the device, turn off the power.
Remove jewelry (including rings, necklaces, and watches) before working
Evaluate the overall loading of the branch circuit before you install any
73

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ctp2008Ctp2024Ctp2056

Table of Contents