Cleaning The Ctp Platform - Juniper CTP2000 Series Hardware Manual

CAUTION:
damage of these items.
Follow these guidelines for storing modules and other components:
Store each module in a separate antistatic bag.
Store other components in an antistatic plastic container. Some of these containers can accommodate
several components in separate compartments.
Do not store multiple modules or other components in an antistatic bag or container where they can
touch other items.
(Optional) Store the item in its antistatic bag or container within the protective packaging or padded box
that the item was shipped in.
RELATED DOCUMENTATION
Required Tools for Maintaining the CTP Platform | 127

Cleaning the CTP Platform | 128

Cleaning the CTP Platform
Dust is attracted to the area where the air intake vents are located. Clean the area with a dry cloth every
few weeks to prevent excessive accumulation of dust. This cleaning helps to maintain the efficiency of
the cooling system and to prevent damage to electronic components.
WARNING:
into an open slot or the backplane when the device is on. Remove jewelry (including
rings, necklaces, and watches) before working on equipment that is connected to power
lines. These actions prevent electric shock and serious burns.
CAUTION:
ESD grounding jack. This action helps to protect modules from damage by electrostatic
discharge.
Failure to store electronic modules and components correctly can lead to
Do not insert any metal object, such as a screwdriver, or place your hand
When cleaning the device, wear an antistatic wrist strap connected to an
128