CHAPTER 8
Module Installation Safety Guidelines and Warnings
IN THIS CHAPTER
Safety Guidelines and Warnings for Installing CTP Modules | 74
Safety Guidelines and Warnings for Installing CTP Modules
Before and during the installation process, observe the following warnings:
WARNING:
activity.
WARNING:
before attaching power cables.
WARNING:
on equipment that is connected to power lines. Metal objects heat up when connected
to power and ground and can cause serious burns or become welded to the terminals.
WARNING:
or the midplane. Doing so can cause electric shock and serious burns.
WARNING:
service personnel are authorized to service parts. Call Juniper Networks Customer
Service to make arrangements to return defective modules for repair.
Do not work on the device or connect or disconnect cables during lightning
Be sure circuit breakers for the power source are in the OFF position
Remove jewelry (including rings, necklaces, and watches) before working
Do not insert any metal object, such as a screwdriver, into an open slot
Never attempt to repair parts of modules yourself. Only trained customer
74