Ctp2008 Platform - Juniper CTP2000 Series Hardware Manual

PMC—Both PMC slots are available to support compatible fiber PMC modules. For more information
about the PMC module, see
Platforms" on page 99.
Ethernet connection—Provides the 1-Gbps Ethernet connection to the IP network by means of a local
Ethernet switch or router.
Console connection—Provides an asynchronous tty connection for locally configuring the CTP Series
device. Because of front panel space limitations, the PP833 processor provides an RS232 serial console
via a supplied USB-to-DB9 cable (p/n 720-071594), in which the DB-9 connector has the same pinout
as a standard RS-232 DTE port.
Figure 1: PP833 Processor (AC and DC Version, Front View)
PMC/XMC1
PMC/XMC1

CTP2008 Platform

The Juniper Networks CTP2008 Circuit to Packet platform is a 3-U high, full-rack wide chassis designed
for tabletop or shelf installation. It can also be installed in a rack with the supplied rack-mounting kit. The
CTP2008 platform has one removable interface module and one removable processor module, and is
available in both AC-powered and DC-powered versions. It has a removable fan tray, and airflow is
side-to-side. Figure 2 on page
containing the PP332 processor (which requires an RTM card for Ethernet and console port accesses).
The new PP833 processor module does not require an RTM card. All PP833 module access is located on
the front panel with all CTP serial and T1/E1 ports. If you are upgrading from the old PP310 or PP332
processor to the PP833 processor, the RTM card may be left in the node. But, none of the interfaces
(Ethernet or serial ports) on the RTM panel are functional.
Figure 2: CTP2008 Chassis Containing the PP332 Processor (AC and DC Version, Front View)
Interface module, slot 0
Optional fiber PMC
"CTP2000 PMC Module" on page 30
USB1
PMC/XMC2 USB2 ETH1
PMC/XMC2
2 USB 1 ETH1 S
3, Figure 3 on page 4, and
Card extractor
USB Power supply screw Power supply extractor
and "Installing a PMC on CTP2000
ETH2
Console
R U P H ETH2 RS232
Figure 4 on page 5 show the CTP2008 chassis
3