Ctp2000 Space Requirements; Ctp2000 Rack Installation - Juniper CTP2000 Series Hardware Manual

Select from the following rack options:
Two-post rack—a freestanding enclosed cabinet with two mounting posts in the front
Telco-type rack—two adjacent mounting posts that you must secure to the floor or an overhead
structure
Four-post rack—a freestanding open rack, either open or closed
The rack must have at least two mounting posts.
The distance between the mounting holes in the two posts must be 18.31 in. +/-.063 in., as specified in
the EIA-310-D document.
A fully loaded rack with three CTP2056 systems must structurally support at least 100 lb (46 kg).
An optional mounting kit is available for midchassis mounting. Contact your Juniper Networks sales
representative for more information.
RELATED DOCUMENTATION
CTP2000 Rack Requirements | 42

CTP2000 Space Requirements | 43

CTP2000 Rack Installation | 43

CTP2000 Space Requirements
If you use an enclosed rack for the device, ensure that there is a minimum of 3 in. of clearance between
the inner side wall and the system. This clearance space ensures adequate air flow.
RELATED DOCUMENTATION
CTP2000 Rack Requirements | 42
CTP2000 Mechanical Requirements | 42
CTP2000 Rack Installation | 43
CTP2000 Rack Installation
To confirm proper equipment rack installation, verify the following:
43