Juniper CTP2000 Series Hardware Manual page 73

Table 22: DB9-to-RJ45 Adapter (p/n 720-014126) Pinouts for Connecting PP833 Processor with a
PC (continued)
RJ-45
6 RXD
7 DSR
8 CTS
You can connect a console (PC, Macintosh, or UNIX workstation) directly to the COM2 port on the PP310
and PP332 processors. On the PP833 processor, a console is connected using the supplied USB-to-DB9
cable (p/n 720-071594), in which the DB-9 connector has the same pinout as a standard RS-232 DTE
port. When the USB-to-DB9 cable is used in conjunction with the DB-9 adapter labelled "p/n 450-071855"
(see Figure 32 on page 67), the available RJ-45 console pinout will be the same as the console connection
on the RTM of PP332/PP310 processor.
Alternatively, if the DB-9 adapter from the bag labelled "p/n 720-056657" (see
used instead of "p/n 450-071855", the available RJ-45 console pinout will be similar to the CTP150 console
port (and other Juniper routers). To connect the PP833 processor with the DB-9 male serial port of a PC,
additionally connect a straight RJ-45 cable with the DB-9 adapter from the bag labelled "p/n 720-056657".
The other end of the RJ-45 cable connects to the DB-9 adapter from the bag labelled "p/n 720-014126"
(see Figure 34 on page 68). Then, you can connect the PC's DB-9 male connector with the DB-9 adapter
"p/n 720-014126".
DB-9
3 TXD
4 DTR
7 RTS
Figure 33 on page 67) is
66