Sealing The 3Rw50 Soft Starter - Siemens SIRIUS 3RW50 Manual

Commissioning

6.2 Sealing the 3RW50 soft starter

6.2 Sealing the 3RW50 soft starter
Requirements
● Seal, sealing wire and a suitable sealing tool
Procedure
Push the wire through the openings provided and seal the ends.
Result
By sealing the hinged cover, you protect the operator controls of the 3RW50 soft starter from
unauthorized access. It is nevertheless still possible to operate a 3RW5 HMI and
acknowledge messages.
Tip
The local interface and the memory module interface of the 3RW5 HMI High Feature can be
protected from unauthorized access by sealing the interface cover. Proceed in the same
sequence as for sealing the hinged cover.
For more information, see Chapter Design and operator controls of the
High Feature 3RW5 HMI (Page 104).
116
SIRIUS 3RW50 soft starter
Manual, 09/2019, A5E35628455002A/RS-AA/001