Navigating and setting
The keys are used for navigation, for selecting and setting menu items and for executing
predefined actions.
Please note that parameters which are set manually using the 6 setting elements cannot be
parameterized via the 3RW5 HMI High Feature.
Key
Actions
Move one position to the right in the input field
•
Display of the line chart in the operation display. Further information can be found in Chapter Graphic
•
display of measured values on the 3RW5 HMI High Feature (Page 147).
Move one position to the left in the input field
•
Switch between the measured values "phase currents (%)" and "phase currents (eff)". For more
•
information, see Chapter Graphic display of measured values on the 3RW5 HMI High Feature (Page 147).
Jump to next menu item
•
Set number or letter
•
Jump to previous menu item
•
Set number or letter
•
To confirm
•
To open the menu
•
Jump to selected menu item
•
To exit the menu
•
Motor stops as parameterized if the 3RW5 HMI High Feature is the master control
•
Motor starts as parameterized if the 3RW5 HMI High Feature is the master control
•
After an error has been acknowledged when using the 3RW5 HMI High Feature, you must repeat the ON
command by pressing the "Motor Start" key.
F1: LOCAL / REMOTE: Changes master control
•
F2: Reset
•
F3-F9 (not available for 3RW50 soft starter)
•
Master RESET key for restoring the factory setting (Page 191).
All parameters that have not been set by means of the setting elements are reset.
1)
SIRIUS 3RW50 soft starter
Manual, 09/2019, A5E35628455002A/RS-AA/001
5.9 Design and operator controls of the High Feature 3RW5 HMI
Parameter assignment
105