Siemens SIRIUS 3RW50 Manual page 148

Functions
7.12 3RW5 HMI High Feature
The example chart shows the current 3 phase currents (L1/L2/L3) and the associated
average value as a percentage.
Procedure for displaying line charts
Operation display
1. Select the measured value to be displayed in the operating display and press the right
navigation key of the 3RW5 HMI High Feature.
The selected measured value is shown graphically in a line chart.
2. Use the left and right navigations keys of the 3RW5 HMI High Feature to switch the view
between Phase currents (%) and Phase currents (rms).
3. Press the "ESC" key to exit the line chart view.
"Monitoring" menu
1. Select the menu item "Monitoring > Measured values > Phase currents (%) / Phase
currents (rms)".
2. Select the phase current to be displayed and press the right navigation key of the
3RW5 HMI High Feature.
The selected phase current is shown graphically in a line chart.
3. Use the left and right navigations keys of the 3RW5 HMI High Feature to switch the view
between Phase currents (%) and Phase currents (rms).
4. Press the "ESC" key to exit the line chart view.
The sample chart shows the current phase current I IL1 as a percentage.
148
SIRIUS 3RW50 soft starter
Manual, 09/2019, A5E35628455002A/RS-AA/001