Performing Diagnostics Of The 3Rw50 Soft Starter With The 3Rw5 Hmi High Feature - Siemens SIRIUS 3RW50 Manual

Messages and diagnosis

8.7 Performing diagnostics of the 3RW50 soft starter with the 3RW5 HMI High Feature

8.7 Performing diagnostics of the 3RW50 soft starter with the
3RW5 HMI High Feature
Requirements
● 3RW5 HMI High Feature
Menu: "Diagnosis > Soft Starter"
Parameter
Diagnostic value
Diagnosis state
Device state
174
Comment
Shows all active warnings and faults.
You can acknowledge errors here (manual RESET).
Type of connection If the 3RW50 soft starter is supplied with main voltage and a motor is
connected, the type of connection is automatically detected.
•
•
Rotation direction
•
•
•
Ready (automatic)
Motor CW
Starting mode active
Stopping mode active
Cooling time active
Current limiting active
Input control
Input 1
Maximum pointer reset
CPU/Master STOP
Automatic mode
Operating mode manual - bus
Operating mode manual - local
Main power rotation right
Main power rotation left
Output 1 active
Output 2 active
Output 3 active
Ready to start for motor ON
Thermal motor model deactivated
Type of motor connection unknown
Type of motor connection inline
Unknown main power direction
(direction of phase rotation of the power system at terminals L1/L2/L3
not detected)
Clockwise
Counter-clockw.
SIRIUS 3RW50 soft starter
Manual, 09/2019, A5E35628455002A/RS-AA/001