Siemens SIRIUS 3RW50 Manual page 142

Functions
7.11 3RW5 HMI Standard
Navigating and setting
Key
142
Actions
Jump to next menu item
•
Set digit
•
Jump to previous menu item
•
Set digit
•
Identical to RESET key on 3RW50 soft starter
•
Motor stops as parameterized if the 3RW5 HMI Standard is the master control.
•
Motor starts as parameterized if the 3RW5 HMI Standard is the master control.
•
Changes master control
•
LOCL means that the 3RW5 HMI Standard is the master control.
REMT means that the 3RW5 HMI Standard is not the master control.
Locking switch Locked / Unlocked:
•
To be able to operate the 3RW50 soft starter with the Standard 3RW5 HMI, the locking
switch on the rear of the Standard 3RW5 HMI must be unlocked. If the locking switch on
the rear of the 3RW5 HMI Standard is in the "Locked" switch position, the "RESET /
TEST", "LOCL / REMT" and "Start" and "Stop" keys are disabled. Navigation through the
menu using the navigation keys, however, is still possible.
SIRIUS 3RW50 soft starter
Manual, 09/2019, A5E35628455002A/RS-AA/001