Restoring The Factory Settings With The Master Reset Button Via 3Rw5 Hmi High Feature - Siemens SIRIUS 3RW50 Manual

9.4.3 Restoring the factory settings with the Master RESET button via
3RW5 HMI High Feature
Requirements
● Make sure that the motor is switched off and you do not start the motor while restoring the
factory settings.
To ensure the quickest and most fault-free restoration of the factory setting, it is
recommended that you disconnect the main voltage at the 3RW5 soft starter.
● Free access to the Master RESET key of the 3RW5 HMI High Feature.
● 3RW5 HMI High Feature is connected to the 3RW5 soft starter via the HMI connecting
cable.
Procedure
1. Press the Master RESET key on the rear of the 3RW5 HMI High Feature.
The menu for restoring the factory setting appears on the display.
2. Select the desired menu item.
– Soft starter
– Communication module
– HMI High Feature
– All devices
3. Confirm the menu item by pressing the OK key.
Result
The factory setting of the selected device or all devices is restored.
Note the effects of the factory settings described in Chapter Effects of the factory setting
(Page 189).
SIRIUS 3RW50 soft starter
Manual, 09/2019, A5E35628455002A/RS-AA/001
Maintenance and service
9.4 Restoring factory setting
191