Siemens SIRIUS 3RW50 Manual page 103

Setting of the parameter "Output ON / RUN" (selection in Step 1):
3. Switch off the supply voltage of the 3RW50 soft starter for at least 5 s.
The set parameters and parameter values are stored.
4. Switch the supply voltage of the 3RW50 soft starter on again.
The set parameters and parameter values are now active.
Result
You have set the parameters in the parameterizing mode.
Further information
For more information about the parameters, see Chapters Parameterizing output 13 / 14
(output signal ON or RUN) (Page 99) and Control via digital input (Page 139).
SIRIUS 3RW50 soft starter
Manual, 09/2019, A5E35628455002A/RS-AA/001
5.8 Setting parameterizing mode via key combination on the 3RW50 soft starter
"RN" LED "ER" LED
Off Off
Off Off
Output ON / RUN
"MT" LED
Output function ON
Off
Output function RUN
Lights up
yellow
Parameter assignment
Set parameter value
103