Siemens SIRIUS 3RW50 Manual page 114

Parameter assignment
5.12 Parameterizing the High Feature 3RW5 HMI
Parameter
Do Control After Logoff
Message display
Operation display
Languages
Only visible if an additional language has been added.
1)
114
Description
This parameter describes the response after logging off while the motor is running.
Continue with motor control
The master control is retained by the 3RW5 HMI High Feature.
Stop motor and give back control (factory setting)
The motor stops and the master control is no longer with the
3RW5 HMI High Feature. Refer to Chapter Operating modes and master control
function (Page 15).
If errors and/or warnings are enabled, they will appear as pop-up windows in the
display of the 3RW5 HMI High Feature as soon as they occur.
Error
Enable (factory setting)
•
Disable
•
Warnings
Enable (factory setting)
•
Disable
•
Up to 5 different measured values can be selected from a list of measured values.
These measured values are then shown in the status display. You can find more
information on input actions in Chapter Monitoring the measured values of the
3RW50 soft starter with the 3RW5 HMI High Feature (Page 146).
Phase current average (%) (factory setting)
•
Phase current average (rms) (factory setting)
•
Phase current I L1 (rms) (factory setting)
•
Phase current I L2 (rms) (factory setting)
•
Phase current I L3 (rms) (factory setting)
•
The required language is set in the "Languages" menu.
English (factory setting)
•
German
•
French
•
Spanish
•
Italian
•
Portuguese
•
Chinese
•
Additional language (Page 159)
• 1)
SIRIUS 3RW50 soft starter
Manual, 09/2019, A5E35628455002A/RS-AA/001