Mounting The Rear Anti-Tip Receptacle (Evo); Mounting The Rear Anti-Tip Receptacle (Yg Series) - TiLite Rigid TR Series Owner's Manual

Mounting the Rear Anti-Tip Receptacle
(Evo)
WARNING
Mounting the rear anti-tip receptacle must be
performed by an authorized TiLite dealer or qualified
technician. If you ignore this Warning, you may fall, tip
over or lose control of the wheelchair and seriously
injure yourself or others or damage the wheelchair.
NOTE: Unless you ordered rear anti-tips when you
originally ordered your TiLite wheelchair, you will need
to order replacement Allen Screws and axle plate
spacers when ordering rear anti-tips.
Tools Needed:
• 5/32" Allen Wrench
• 7/16" Open End Wrench
1. Remove the rear wheels and place the frame on a
level surface.
2. Remove all three (3) Allen Screws that secure the
adjustable axle plate to the frame. Carefully note the
placement of the plate and the order of the various
washers and nuts.
3. Install the anti-tip receptacle as shown in Figure
128. Note that the axle plate spacer must be added
between the adjustable axle plate and the frame at
the forward end of the adjustable axle plate.
4. At the rearward end of the adjustable axle plate,
insert the replacement Allen Screw through the
washers, the frame, the washers, the anti-tip
receptacle, and the adjustable axle plate and
securely tighten the locknuts.
5. Install the second Allen Screw through the washers,
the frame, the washers, and the anti-tip receptacle
and securely tighten the locknuts.
6. At the forward end of the adjustable axle plate,
insert the replacement Allen Screw through the
washers, the frame, the washers, the spacer and
the adjustable axle plate and securely tighten the
locknuts.
7. Reinstall the rear wheels.
Mounting the Rear Anti-Tip Receptacle
(YG Series)
WARNING
Mounting the rear anti-tip receptacle must be
performed by an authorized TiLite dealer or qualified
technician. If you ignore this Warning, you may fall, tip
over or lose control of the wheelchair and seriously
injure yourself or others or damage the wheelchair.
NOTE: Unless you ordered rear anti-tips when you
originally ordered your TiLite wheelchair, you will need
to order replacement Allen Screws when ordering rear
anti-tips.
88
Allen
Axle Plate
Screws
Spacer
Lock Nuts
Anti-Tip Anti-Tip
Recepticle
Receptacle
Figure 128
EVO Anti-tip Configuration
Allen
Screws
Axle Plate
Spacers
Figure 129
YG Series Anti-tip Configuration
TiLite ® OM000007 - Rev. B
Anti-Tip
Receptacle
Lock Nuts