TiLite Rigid TR Series Owner's Manual page 29

Inspection Item
Quick/Quad Release Axles
Make sure axles are free of dirt and lint
Wipe axle with cloth using "dry" silicone spray as
lubricant
Make sure that axles lock properly in axle sleeve
Rear Tires
Check for proper inflation as per sidewall of
pneumatic tire (under-inflation will increase rolling
resistance and will prevent wheel locks from properly
engaging; overinflation may cause a tire to explode)
Inspect for cracks, wear and flat spots
Camber Tube/Axle Sleeves
Camber tube clamps are securely tightened
Camber plugs are secure in camber tube and axle
sleeves are secure in camber plug
Adjustable camber system (if applicable) is securely
tightened and axle sleeves extend proper distance from
camber plug
Handrims
Inspect for signs of rough edges or peeling
Make sure handrims are securely attached to rim
Wheel Locks
Make sure wheel locks embed proper distance into
tire and prevent chair from moving when engaged
Make sure wheel locks do not interfere with tire when
disengaged
Make sure pivot points are free of wear and looseness
Seat Sling and Back Upholstery
Inspect for rips or sagging
Inspect fastening flaps to ensure they are securely
attached
Inspect while seated to ensure sling supports your weight
and does not touch crosstube.
Front Casters/Forks
Inspect wheels and tires for cracks and wear
Inspect wheel/fork assembly for proper tension by
spinning caster (caster should come to a gradual stop);
if caster wobbles, tighten axle; if caster binds to a stop,
loosen axle
TiLite ® OM000007 - Rev. B
Initially Weekly 3 Months
21