Adjusting The Seat Depth - TiLite Rigid TR Series Owner's Manual

Adjusting the Seat Depth

Tools Needed:
• 3/16" Allen Wrench
• Ruler or measuring tape
1. Remove the seat cushion and fold down the back
of the chair.
2. Loosen, but do not remove, the two Allen Screws
that secure the backrest bracket to the frame on
both sides of the chair. See Figure 136.
3. Slide the backrest assembly forward or backward
to the desired location.
4. Use a ruler to make sure the backrest brackets
are positioned in the identical location on both
sides of the chair.
5. Securely tighten both Allen Screws on both
brackets.
92
Allen Screws
Backrest Bracket
Figure 136
Adjusting the Seat Depth
TiLite ® OM000007 - Rev. B