Titanium Open Loop Footrest (Aero Z); Angle Adjustable Footrest (Tr Series, Yr Series, Zr Series, Aero Z, Bb And Evo); Adjusting The Angle Of The Footrest; Replacing Or Adjusting The Height Of The Footrest - TiLite Rigid TR Series Owner's Manual

Titanium Open Loop Footrest
(Aero Z)
The Titanium Open Loop Footrest (see Figure 6) can
be replaced or the height adjusted by using the tools
and following the procedures under "Titanium Footrest
with Flat ABS Cover (Aero Z)" on page 27.
Angle Adjustable Footrest
(TR Series, YR Series, ZR Series, Aero Z, BB and
Evo)

Adjusting the Angle of the Footrest

Tools needed:
• 5/32" Allen Wrench
• 7/16" Allen Wrench
1. Loosen, but do not remove, the two Allen Screws
that secure the footplate to the clamp. See Figure 7.
2. Adjust the footrest to desired angle. See Figure 8.
3. Tighten the Allen Screws, making sure the screws
and the lock nuts are secure and will not permit the
footplate to move up or down under weight.
Replacing or Adjusting the Height of the
Footrest
The Angle Adjustable Footrest (see Figure 8) for TR
Series, YR Series, Evo and BB chairs can be
9 9
replaced or the height adjusted by using the tools and
8 8
following the procedures under "Titanium Footrest
7 7
6 with Flat ABS Cover (TR, YR and BB)" on page 25. 6
5 5
4 4
The Angle Adjustable Footrest (see Figure 8) for ZR
3 3
Series chairs can be replaced or the height adjusted
2 2
by using the tools and following the procedures under
1 1
"Titanium Footrest with Flat ABS Cover (ZR Series)"
on pages 26-27.
The Angle Adjustable Footrest (see Figure 8) for Aero
Z chairs can be replaced or the height adjusted by
using the tools and following the procedures under
"Titanium Footrest with Flat ABS Cover (Aero Z)" on
page 27.
Angle Adjustable High Mount
Footrest
(TR Series, YR Series and Evo)
Adjusting the Angle of the Footrest
Tools needed:
• 5/32" Allen Wrench
• 7/16" Allen Wrench
The angle of the Angle Adjustable High Mount Footrest
for TR Series, YR Series, Evo and YG chairs can be
adjusted by using the tools and following the
procedures under "Angle Adjustable Footrest (TR
28
Allen Screw
Locknut
Figure 7
Adjusting the Angle of the Angle
Adjustable Footrest
Figure 8
Angle Adjustable Footrest
Allen
Screws
Footplate
Frame
Binder
Clamp
Allen
Screws
Figure 9
TR Series/YR Series/Evo/YG Angle Adjustable
High Mount Footrest
TiLite ® OM000007 - Rev. B
Footplate
Clamp
Footplate
Clamp
Footrest
Extention