Cleaning; Cleaning The Frame; Cleaning The Upholstery - TiLite Rigid TR Series Owner's Manual

Inspection Item
Inspect wheel/fork assembly/stem bolt to ensure that
stem bolt is secure (wheel/fork assembly should not have
excessive play relative to the stem bolt but should rotate
freely); if necessary, tighten stem bolt
Ensure that wheel bearings are clean and free from
moisture
If pneumatic, check for proper inflation as per the
sidewall (under-inflation will increase rolling
resistance and will prevent wheel locks from properly en-
gaging; and over-inflation may cause a tire to explode
Armrests
Inspect to ensure that all hardware is securely attached
Footrests
Inspect to ensure that all hardware is securely attached
Anti-tips
Inspect anti-tip wheel for cracks and wear
Inspect to ensure that anti-tip receptacle is securely
attached
Frame
Inspect for cracks

Cleaning

Cleaning
Cleaning Cleaning Cleaning
Clean your chair regularly. Cleaning often will reveal loose or worn parts and enhance the smooth
operation of your chair.
Cleaning the Fr r r r r ame Cleaning the F Cleaning the F ame ame ame
Cleaning the F Cleaning the F ame
1. If your titanium frame came with a "Satin" finish, use a soft cloth to clean the finish. If necessary,
moisten the cloth with glass cleaner. If the "Satin" finish of your chair becomes scratched, you
can buff out the scratch using a Scotch Brite™ pad. Moisten the pad with water and rub it over
the scratch in a circular motion. After buffing, wipe off the buffed area using a soft cloth
moistened with glass cleaner or wood furniture polish. Note: Do NOT use a Scotch Brite™ pad
on the logo, and NEVER use steel wool to clean your frame.
2. If your titanium chair came with a "Polished" finish, use a soft cloth to clean the finish. If
necessary, moisten the cloth with glass cleaner. Note: NEVER use Scotch Brite™ pads or steel
wool on a polished frame.
3. If your chair has a painted aluminum frame, use a soft clean cloth with soap and water to clean
the frame. Immediately dry all components and parts that become wet. Note: Do NOT use
Scotch Brite™ pads, steel wool, abrasive cleaners or petroleum-derived products to clean a
painted aluminum frame.
Cleaning the Upholster Cleaning the Upholstery y y y y Cleaning the Upholster Cleaning the Upholster Cleaning the Upholster
1. Regularly hand-wash the seat sling and back upholstery using water and a mild detergent.
Always air dry the upholstery.
2. NEVER machine wash the upholstery, and NEVER machine dry the upholstery.
3. When washing the upholstery, carefully check for sagging, rips or tears. If you find any rips or
tears, you MUST order new upholstery.
4. After washing the seat sling, always check the tension while seated in the chair to ensure the
sling does not touch the cross tube beneath the seat sling.
22
Initially Weekly 3 Months
TiLite ® OM000007 - Rev. B