Removing Push Handles - TiLite Rigid TR Series Owner's Manual

5. Securely tighten the four Allen Screws.
6. Engage the adjustable handle by pressing it
toward the clamp. This will securely hold the push
handle. Check for any looseness and, if
necessary, disengage adjustable handle, screw it
in further and re-engage it.
WARNING
NEVER attempt to lift a wheelchair up a curb, step or
flight of stairs by lifting on any removable (detachable)
parts, such as height adjustable clamp-on push
handles. If you ignore this Warning, you may fall, tip
over or lose control of the wheelchair and seriously
injure yourself or others or damage the wheelchair.

Removing Push Handles:

Tools Needed:
• 3/8" Allen Wrench
1. Remove the four Allen Screws and remove the
clamp and handle.
40
TiLite ® OM000007 - Rev. B