Mazda CX-30 2020 Owner's Manual page 87

Intrusion sensor cancel button
To cancel the intrusion sensor (part of
the theft-deterrent system), press the
intrusion sensor cancel button within
20 seconds after pressing the lock
button and the hazard warning lights
will flash 3 times.
Refer to Theft-Deterrent System on
page 3-49.
Power saving function
By turning on the transmitter power
saving function, the advanced keyless
*1
entry and push button start system
functions turn off and the battery
power consumption of the transmitter
is restricted.
The remote control function is
operational by operating the
transmitter switch even while the
power saving function is turned on.
However, the operation indicator light
of the transmitter does not turn on/
flash.
Turning on the power saving function
After you have turned on the power
saving function according to the
following procedure, the hazard
warning lights and sound operate
one time.
1. Press the lock button on the
transmitter 4 times within 3
seconds to turn on the operation
indicator light.
2. Press the lock button continuously
for 1.5 seconds or longer while the
operation indicator light turns on
(for 5 seconds).
* 3. Press any of the buttons on the
Turning off the power saving function
After you have turned off the power
saving function according to the
following procedure, the hazard
warning lights and sound operate
one time.
1. Press any of the buttons on the
2. Press the lock button on the
3. Press the lock button continuously
*
1
▼ Operational Range
The system operates only when the
driver is in the vehicle or within
operational range while the key is
being carried.
Starting the Engine
NOTE
Starting the engine may be possible

*1
even if the key is outside of the
vehicle and extremely close to a door
and window, however, always start
the engine from the driver's seat.
If the vehicle is started and the key is
not in the vehicle, the vehicle will not
restart after it is shut off and the
ignition is switched to off.
transmitter to make sure that the
operation indicator light does not
turn on/flash.
transmitter to make sure that the
operation indicator light does not
turn on/flash.
transmitter 4 times within 3
seconds to turn on the operation
indicator light.
for 1.5 seconds or longer while the
operation indicator light turns on
(for 5 seconds).
With the advanced keyless function
*Some models.
Before Driving
Keys
*1
3-7