Mazda CX-30 2020 Owner's Manual page 208

When Driving
Switches and Controls
Turn and Lane-Change
Signals
▼ Turn and Lane-Change Signals
The ignition must be switched ON to
use the turn and lane-change signals.
▼ Direction Indicators
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel
after the turn is completed.
If the indicator light continues to flash
after a turn, manually return the lever
to its original position.
1. Right turn
2. Right lane change
3. OFF
4. Left lane change
5. Left turn
The direction indicators in the
instrument cluster flash according to
the operation of the direction indicator
lever to show which signal is working.
4-60
NOTE
There may be a problem with the

direction indicator lights if they do
not flash but remain turned on, or
they flash abnormally. Have your
vehicle inspected by an expert
repairer (we recommend an
Authorised Mazda Repairer).
A personalised function is available

to change the turn indicator sound
volume.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
▼ Lane-Change Signals
Move the lever halfway toward the
direction of the lane change―until the
indicator flashes― and hold it there. It
will return to the off position when
released.
▼ Three-Flash Turn Signal
After releasing the direction indicator
lever from the halfway point, the
direction indicator flashes 3 times. The
operation can be cancelled by moving
the lever in the direction opposite to
which it was operated.
NOTE
The three-flash turn signal function can
be switched to on/off using the
personalisation function.
Refer to the Settings section in the
Mazda Connect Owner's Manual.