Mazda CX-30 2020 Owner's Manual page 583

You can change the vehicle speed
setting at which the warning is
triggered.
▼ 120 km/h Warning Beep
If the vehicle speed exceeds 120
km/h, a chime sounds for 5 seconds.
▼ Blind Spot Monitoring (BSM)
Warning Beep
The Blind Spot Monitoring (BSM)
warning beep operates when the
direction indicator lever is operated to
the side where the Blind Spot
Monitoring (BSM) warning light is
illuminated.
▼ Front Cross Traffic Alert (FCTA)
Warning Beep
The Front Cross Traffic Alert (FCTA)
warning beep is activated if there is a
possibility of collision with a vehicle
approaching from the front on the left
and right sides of the vehicle.
▼ Rear Cross Traffic Alert (RCTA)
Warning Beep
The Rear Cross Traffic Alert (RCTA)
warning beep is activated if there is a
possibility of collision with a vehicle
approaching from the rear on the left
and right sides of the vehicle.
▼ Lane Departure Warning Sound
While the system is operating, if the
system determines that the vehicle may
depart from the lane, it sounds a
warning sound.
NOTE
The volume of the Lane Departure
Warning System (LDWS) warning
sound can be changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Warning/Indicator Lights and Warning Sounds
*
*
*
*
▼ Mazda Radar Cruise Control
(MRCC) System Warnings
The Mazda Radar Cruise Control
(MRCC) system warnings notify the
driver of system malfunctions and
cautions on use when required.
Check based on the beep sound.
Warning beep type
The beep sounds 1
time while the Mazda
Radar Cruise Control
(MRCC) is operating
The beep sounds in-
termittently while the
Mazda Radar Cruse
Control (MRCC) is op-
erating.
▼ Mazda Radar Cruise Control with
Stop & Go function (MRCC with
Stop & Go function) System
Warnings
The Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop
& Go function) system warnings notify
the driver of system malfunctions and
cautions on use when required.
*
Check based on the beep sound.
Warning beep type
The beep sounds 1
time while the Mazda
Radar Cruise Control
with Stop & Go func-
tion (MRCC with Stop
& Go function) is op-
erating
If Trouble Arises
*
Notification content
The vehicle speed is
slower than 25 km/h
(16 mph) and the
Mazda Radar Cruise
Control (MRCC) sys-
tem has been cancel-
led.
The distance between
your vehicle and the
vehicle ahead is too
close. Check the safety
of the surrounding
area and reduce vehi-
cle speed.
*
Notification content
If a malfunction occurs
in the system, make
sure that the Mazda
Radar Cruise Control
with Stop & Go func-
tion (MRCC with Stop
& Go function) has
been cancelled.
*Some models.
7-71