Mazda CX-30 2020 Owner's Manual page 321

to the speed of the displayed speed
limit sign.
1. Speed limit sign setting indication
NOTE
The speed limit cannot be set from

the speed limit sign when the speed
limit sign indication is displayed in
gray.
Excessive speed range setting
The range of speed that can exceed the
set speed can be changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
+ 0: The vehicle speed is restricted at

the set speed.
+ 5: If the vehicle speed exceeds the

set speed by 5 km/h (3mph), the
vehicle speed is restricted.
+ 10: If the vehicle speed exceeds

the set speed by 10 km/h (5 mph),
the vehicle speed is restricted.
▼ Temporarily Cancelling the System
The system is temporarily cancelled
(stand-by status) when any of the
following operations is done while the
ISA is displayed.
CANCEL switch is pressed

Accelerator pedal is strongly

depressed
Any door is opened

The driver's seat belt is unfastened

NOTE
The set speed can be set by pressing

the RES switch up (SET+) or down
(SET-) while the system is in stand-by
status.
The ISA is not cancelled by

depressing the brake pedal.
When Driving
i-ACTIVSENSE
4-173