Mazda CX-30 2020 Owner's Manual page 156

When Driving
Start/Stop Engine
NOTE
(Germany)

Drive immediately after starting
the engine. However do not use
high engine speeds until reaching
the operating temperature.
(SKYACTIV-G 2.0, SKYACTIV-G

2.5, SKYACTIV-X 2.0)
Whether the engine is cold or

warm, it should be started
without the use of the
accelerator.
If the engine does not start the

first time, refer to Starting a
Flooded Engine under
Emergency Starting. If the
engine still does not start, have
your vehicle inspected by an
expert repairer (we recommend
an Authorised Mazda Repairer)
(page 7-42).
(SKYACTIV-D 1.8)

If the ambient temperature is
lower than about － 10 °C (14
°F), the maximum engine speed
may not be attained for about 3
minutes after the engine starts to
protect the engine.
(Manual transmission vehicle

with i-stop function)
If the engine has stopped due to
stalling, it can be restarted by
depressing the clutch pedal
within 3 seconds of the engine
stopping.
The engine cannot be restarted
even if the clutch pedal is
depressed under the following
conditions:
The driver's door is open.

The driver's seat belt is

unfastened.
The clutch pedal is not released

completely after the engine
stalled.
4-8
The clutch pedal is depressed

with the engine not stopped
completely.
▼ Engine Start Function When Key
Battery is Dead
CAUTION
When starting the engine by holding
the transmitter over the push button
start due to a dead key battery or a
malfunctioning key, be careful not to
allow the following, otherwise the
signal from the key will not be received
correctly and the engine may not start.
Metal parts of other keys or metal
objects touch the key.
Spare keys or keys for other vehicles
equipped with an immobilizer
system touch or come near the key.
Devices for electronic purchases, or
security passage touch or come near
the key.
If the engine cannot be started due to
a dead key battery, the engine can be
started using the following procedure:
1. Continue to depress the brake
pedal firmly until the engine has
completely started.
2. (Manual transmission)
Continue to depress the clutch
pedal firmly until the engine has
completely started.