Mazda CX-30 2020 Owner's Manual page 29

NOTE
If you do not perform the operation

correctly, a sound indicating that the
programming has failed is activated.
If the angle of the outer mirrors only

changes a little, the angle of the
outer mirrors may not have been
programmed correctly.
If the angle of the outer mirrors is

adjusted close to the limits of its
range of motion, the driving position
can be successfully programmed, but
it may fail when calling up the
programmed driving position.
Calling up the programmed driving
position
CAUTION
Do not place fingers or hands around
the bottom of the seat while the seat
memory function is operating. The seat
moves automatically while the seat
memory function is operating and
fingers or hands could get pinched and
injured.
Using the position memory button
1. Make sure the parking brake is on.
2. (Automatic transmission)
Make sure the selector lever is in
the P position.
3. Switch the ignition ON.
4. Press the programming button for
the driving position you want to call
up (button 1 or 2).
5. A sound is activated when the
adjustment to the programmed
driving position is completed.
NOTE
When adjustment of the driving

position is not necessary, a sound is
not activated.
The driving position adjustment is

cancelled in the following cases:
The seat adjustment switch on the

driver's seat is operated.
The angle of the outer mirrors is

adjusted.
The SET button is pressed.

Programming button 1 or 2 is

pressed.
The lock button or unlock button

on the transmitter is pressed.
The vehicle starts moving.

The active driving display is

adjusted.
(Manual transmission)

The parking brake is released.
(Automatic transmission)

The selector lever is shifted to a
position other than P.
Using the transmitter
1. Unlock the driver's door using one
of the following methods.
Touch the sensing area of the

door release touch sensor.
Press the unlock button on the

transmitter.
2. When you open the driver's door
within 90 seconds after unlocking
the doors, the adjustment of the
following parts starts.
Driver's seat

Active driving display (When the

ignition is switched ON, the
adjusted active driving display is
activated.)
Outside mirrors

A sound is activated when the
adjustment is completed.
NOTE
When adjustment of the driving

position is not necessary, a sound is
not activated.
Essential Safety Equipment
Seats
2-11