Mazda CX-30 2020 Owner's Manual page 576

If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*1*2
Display
Mazda Radar Cruise
Control Cancelled.
Drive Safely
Distance & Speed Alert
Operation Cancelled
Drive Safely
Cruise Control Opera-
tion Cancelled. Drive
Safely
Emergency Braking Acti-
vated. Depress Brake
Pedal to Hold Stop
Engine Stopped. Restart
Engine Normally
Continue to Depress
Brake Pedal While i-stop
Is Active
Touch Key Fob to Push
Button Start Switch
7-64
Content
This message is indicated when the
Mazda Radar Cruise Control
(MRCC), Mazda Radar Cruise Con-
trol with Stop & Go function (MRCC
with Stop & Go function), and the
Cruising & Traffic Support (CTS) have
been cancelled other than by the
driver.
This message is indicated when the
Distance & Speed Alert (DSA) have
been cancelled other than by the
driver.
This message is indicated when the
Cruise Control have been cancelled
other than by the driver.
This message is indicated after the
Smart Brake Support (SBS) brakes op-
erate and when the Smart Brake Sup-
port (SBS) is cancelled.
This message is indicated under the
following conditions while the i-stop
function is operating.
(With M Hybrid)
(Manual transmission)

The driver's door is opened.
(Automatic transmission)

The driver's seat belt is unfastened
and the driver's door is opened.
(Without M Hybrid)
The driver's seat belt is unfastened

and the driver's door is opened.
This message is indicated when the
driver's door is opened while the
i-stop function is operating.
This message is indicated when the
key battery is weak (battery dead or
damaged key).
Action to be taken
Have your vehicle inspected by an ex-
pert repairer (we recommend an Au-
thorised Mazda Repairer).
Have your vehicle inspected by an ex-
pert repairer (we recommend an Au-
thorised Mazda Repairer).
Have your vehicle inspected by an ex-
pert repairer (we recommend an Au-
thorised Mazda Repairer).
Depress the brake pedal.
Press the push button start again to
start the engine. For automatic trans-
mission vehicles, shift the selector
lever to the P position before starting
the engine.)
Depress the brake pedal. Stop the
engine before leaving the vehicle.
Touch the key against push button
start to start the engine.
Refer to Engine Start Function When
Key Battery is Dead on page 4-8.