Mazda CX-30 2020 Owner's Manual page 581

perform the applicable procedure
(page 3-8).
▼ Power Liftgate Warning Beep
If system operation precautions are
necessary, the driver is notified by the
warning sound.
Warning beep
The beep sounds 3
times
The beep sound con-
tinues
▼ Low Fuel Warning Beep
When the low fuel warning light
flashes, a warning beep is activated
once at the same time.
▼ Electronic Steering Lock Warning
Beep
The warning beep operates if the
steering wheel is not unlocked after the
push button start is pressed. (page
4-4)
▼ Brake System Warning Beep (With
M Hybrid)
A warning beep is activated if a
problem with the brake system occurs
and the brakes may not work as
intended. Decelerate the vehicle while
checking the safety of the surrounding
area, and park the vehicle in a safe
place. After stopping the vehicle,
contact an expert repairer (we
recommend an Authorised Mazda
Repairer).
Warning/Indicator Lights and Warning Sounds
*
What to check
The conditions re-
quired for the power
liftgate to operate have
not been met, such as
an object being stuck
in the liftgate.
The vehicle is being
driven with the liftgate
open. Stop the vehicle
and close the liftgate.
▼ Brake Override Warning Beep
A warning beep is activated when the
accelerator pedal and brake pedal are
depressed at the same time while
driving. Only depress the brake pedal.
▼ Vehicle Problem Warning Beep
If any of the following problems occur,
a warning beep is activated. Check the
information regarding the warning
indication in the instrument cluster or
on the centre display.
Automatic transmission problem

Increase in automatic transmission

internal temperature
M Hybrid problem

Brake fluid amount decrease

Engine oil level sensor problem

Electric Parking Brake (EPB) problem

Engine hydraulic pressure decrease

Engine coolant temperature increase

Engine system problem

▼ Shift Position Warning Beep
A sound is activated when the push
button start is pressed while the
selector lever is in a position other
than P, and the ignition is switched to
ACC. Check the selector lever
position.
▼ Selector Lever Not In P or N
Reminder Warning Beep (With M
Hybrid)
A warning beep is activated
continuously if the driver's door is
opened with the selector lever in a
position other than the P or N
position. Shift the selector lever to the
P or N position, or close the driver's
door.
▼ i-stop Warning Beep
If the driver's door is opened while

engine idling is stopped, the warning
If Trouble Arises
*
7-69
*Some models.