Mazda CX-30 2020 Owner's Manual page 210

When Driving
Switches and Controls
Switch Posi-
tion
High speed
Variable-speed intermittent wipers
Set the lever to the intermittent
position and choose the interval timing
by rotating the switch.
Rotate the switch upward to shorten
the interval time of the wiper
operation, and rotate the switch
downward to lengthen it.
1. Switch
2. Shorten
3. Lengthen
With auto-wiper control
1. Indicator light
4-62
*Some models.
Wiper operation
Switch Position
No. Type A Type B
MIST
OFF
*1
AUTO AUTO
LO
*
1 When the wiper lever is switched to the
AUTO position, the indicator light turns on.
Auto-wiper control
When the wiper lever is in the AUTO
position, the rain sensor senses the
amount of rainfall on the windscreen
and turns the wipers on or off
automatically (off―intermittent―low
speed―high speed).
The sensitivity of the rain sensor can be
adjusted by turning the switch on the
wiper lever.
From the centre position (normal),
rotate the switch upward for higher
sensitivity (faster response) or rotate it
downward for less sensitivity (slower
response).
1. Switch
2. Higher sensitivity
3. Centre position
4. Less sensitivity
Wiper operation
Operation while
pulling up lever
Stop
*1
Auto control
Low speed
HI High speed
*