Mazda CX-30 2020 Owner's Manual page 654

Customer Information
Electromagnetic Compatibility
Electromagnetic
Compatibility
▼ Electromagnetic Compatibility
Your Mazda has been tested and
certified to the UN-R
as related to electromagnetic
compatibility. Radio Frequency (RF)
transmitter equipment (e.g. cellular
telephones, amateur radio
transmitters, etc.) may only be fitted to
your Mazda if they comply with the
parameters shown in the table below.
*
1 UN-R stands for United Nations
Regulation.
It is your responsibility to ensure that
any equipment you have fitted
complies with applicable local
legislations. Have any equipment fitted
by properly trained technicians.
CAUTION
Do not mount any transceiver,
microphones, speakers, or any other
item in the deployment path of the
air bag system.
Do not fasten aerial lead to original
vehicle wiring, fuel pipes or brake
pipes. Avoid running the aerial lead
parallel with the wire harness to the
best extent possible.
Keep the aerial and power leads at
least 100 mm (3.9 in) from any
electronic modules and the air bags.
8-66
*1
10 regulation
Avoid using the cigar lighter or
accessory socket as a power source
for the RF-transmitting equipment.
Aerial positions:
1. Front right of roof
2. Both sides of liftgate
3. Centre of roof
4. Front left of roof
Maximum out-
Frequency
put power
Band (MHz)
(Wattage)
50 ― 54
68 ― 87.5
142 ― 176
380 ― 470
806 ― 940
1200 ―
1300
1710 ―
1885
1885 ―
2025
2400 ―
0.01
2500
*
1 Only for Bluetooth
NOTE
After the installation of RF transmitters,
check for disturbances from and to all
electrical equipment in the vehicle,
both in the standby and transmit
modes.
Check all electrical equipment:
Aerial Positions
50
50
50
50
10
10
10
10
*1
In a cabin
®
*1