Mazda CX-30 2020 Owner's Manual page 477

Whenever the engine oil is replaced, the vehicles engine control unit needs to be

reset as soon as possible. Otherwise the wrench indicator light or engine oil
warning light may turn on. To reset the engine control unit, consult an expert
repairer (we recommend an Authorised Mazda Repairer) or refer to the vehicle
status monitor section in the Mazda Connect Owner's Manual.
▼ Inspecting Engine Oil Level
NOTE
If the engine oil level warning

indication/warning light turns on,
add 1 L (0.26 US gal, 0.22 Imp gal)
of engine oil.
(SKYACTIV-D 1.8)

If "Excessive Oil Level. Have the
Vehicle Inspected" is displayed on
the multi-information display in the
instrument cluster, have your vehicle
inspected at an expert repairer (we
recommend an Authorised Mazda
Repairer).
1. Be sure the vehicle is on a level
surface.
2. Warm up the engine to normal
operating temperature.
3. Turn it off and wait at least 5
minutes for the oil to return to the
sump.
4. (SKYACTIV-X 2.0)
Open the engine cover (page
6-19).
5. Pull out the dipstick, wipe it clean,
and reinsert it fully.
Owner Maintenance
SKYACTIV-G 2.0 and SKYACTIV-G
2.5
1. MAX
2. OK
3. MIN
SKYACTIV-X 2.0
1. MAX
2. OK
Maintenance and Care
6-27