Mazda CX-30 2020 Owner's Manual page 341

(Automatic transmission)

The selector lever is shifted to P position (displayed when the selector lever is in
a position other than P).
(Displayed when vehicle speed is less than 15 km/h (9.3 mph))

4 minutes and 30 seconds have passed.

The vehicle speed is about 15 km/h (9.3 mph) or faster.

(Displayed when the vehicle speed is about 15 km/h (9.3 mph) or faster)

The vehicle speed is about 15 km/h (9.3 mph) or faster after 8 seconds have

passed since pressing the 360°View Monitor switch.
Four minutes and 22 seconds have passed from the point when the vehicle

speed was less than 15 km/h (9.3 mph) after 8 seconds have passed since
pressing the 360°View Monitor switch.
The 360°View Monitor settings can be changed as follows.

Refer to the Settings section in the Mazda Connect Owner's Manual.
Automatic display of the 360°View Monitor when the ultrasonic senor detects

an obstruction.
Automatic display of the 360°View Monitor when the ignition is switched ON.

Screen priority level when the system launches.

Top view/Rear view, Top view/Rear wide view
The top view/rear view, top view/rear wide view displays when all of the following
conditions are met.
The ignition is switched ON.

Shift lever/selector lever is in R position.

Display switching
The displayed screen can be changed each time the 360°view monitor switch is
pressed.
1. Top view/Rear view
2. Top view/Rear wide view
NOTE
The top view/rear view and top view/rear wide view automatically display

whether or not the 360°View Monitor switch is turned on or off when shifting the
shift lever/selector lever to R position.
The top view/rear view and top view/rear wide view displays the previously

displayed screen.
When Driving
i-ACTIVSENSE
4-193